Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Modifications apportées à l'étape #15

Modifié par Nick

Modification approuvée par Nick

Avant
Après
Inchangé

Lignes de l'étape

[title] Starting the repair: Removing the old capacitors
[* icon_caution] Do not touch the soldering iron while removing the old caps! If'''If you do not have something like Helping Hands,Hands on hand, be careful not to touch the tip of your soldering iron. It may help to hold the board at an angle.angle in this scenario.'''
[* icon_reminder] When one or two capacitors failWhile it may be possible to do a partial capacitor replacement, the restremaining capacitors are likely to fail. For this reason, itfail next. It is best to replace them as athe entire set at oncewhile the monitor is apart.
[* icon_caution] Do not touch the soldering iron while removing the old caps! If'''If you do not have something like Helping Hands,Hands on hand, be careful not to touch the tip of your soldering iron. It may help to hold the board at an angle.angle in this scenario.'''
[* icon_reminder] When one or two capacitors failWhile it may be possible to do a partial capacitor replacement, the restremaining capacitors are likely to fail. For this reason, itfail next. It is best to replace them as athe entire set at oncewhile the monitor is apart.
[* icon_reminder] If you do not know how to solder, refer to this guide: [guide|750]
[* black] Take the board out to'''Move to a place you can solderworkspace with ventilation or use a fume extractor.''' Once in an appropriate workspace, desolder the new caps on. To remove the capacitors and heatold capacitors. Heat one leg up whileand remove the solder is melted. Lift the leg up once the solder is melted. This should be donecapacitor; do this for both sides of each capacitor you are replacinglegs.
[* black] WithAfter removing the capacitors removed fromcapacitors, clean up the power supply boardold solder. To do this, take youra desoldering braid and clean up the old solder up. Thefrom the pads. '''The desoldering braid needs tomust be lifted up with theyour soldering iron or it will stick to the board.iron.'''
[* black] Take the board out to'''Move to a place you can solderworkspace with ventilation or use a fume extractor.''' Once in an appropriate workspace, desolder the new caps on. To remove the capacitors and heatold capacitors. Heat one leg up whileand remove the solder is melted. Lift the leg up once the solder is melted. This should be donecapacitor; do this for both sides of each capacitor you are replacinglegs.
[* black] WithAfter removing the capacitors removed fromcapacitors, clean up the power supply boardold solder. To do this, take youra desoldering braid and clean up the old solder up. Thefrom the pads. '''The desoldering braid needs tomust be lifted up with theyour soldering iron or it will stick to the board.iron.'''