Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Modifications apportées à l'étape #15

Modifié par Nick

Modification approuvée par Nick

Avant
Après
Inchangé

Lignes de l'étape

[title] Remove the old capacitors
[* icon_caution] '''''If you do not have a Helping Hands on handHands, be careful not to touch the tip of your soldering iron. It may help to holdTry holding the board at an angle into make this scenarioeasier.'''''
[* icon_reminder] While it may be possible to do a partial capacitor replacement, the remaining capacitors will also fail. It's best tofail - do all of them at once. '''''If youit once and do not know how to solder, referit correctly. '''''Refer to this guideguide for soldering tips: [guide|750].'''''
[* icon_caution] '''''If you do not have a Helping Hands on handHands, be careful not to touch the tip of your soldering iron. It may help to holdTry holding the board at an angle into make this scenarioeasier.'''''
[* icon_reminder] While it may be possible to do a partial capacitor replacement, the remaining capacitors will also fail. It's best tofail - do all of them at once. '''''If youit once and do not know how to solder, referit correctly. '''''Refer to this guideguide for soldering tips: [guide|750].'''''
[* black] '''''Move in a workspace with ventilation or use a fume extractor.''''' Once in an appropriate workspace, desolder the old capacitors. Heat one leg up and remove the capacitor. Do this for both legs.
[* black] After removing the capacitors, clean up the old solder. To do this, take a desoldering braid and clean up the solder from the pads. '''''The desoldering braid must be lifted up with your soldering iron.'''''