Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Modifications apportées à cette étape

Modifié par Nick

Modification approuvée par Nick

Avant
Après
Inchangé

Lignes de l'étape

[* icon_note] This is only required if a clean hole to work with was not produced removing the old capacitor from the power supply. If you produced a clean hole removing the old cap, this step isn't required.
[* black] With a desoldering braid and flux, put he desoldering braid down on the solder joint and let it absorb the old solder from the holehole to add new solder.
[* icon_note] This is only required if a clean hole to work with was not produced removing the old capacitor from the power supply. If you produced a clean hole removing the old cap, this step isn't required.
[* black] With a desoldering braid and flux, put he desoldering braid down on the solder joint and let it absorb the old solder from the holehole to add new solder.