Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Modifications apportées à cette étape

Modifié par Nick

Modification approuvée par Nick

Avant
Après
Inchangé

Lignes de l'étape

[* icon_note] This is only required if a clean hole to work with was not produced removing the old capacitor from the power supply. If you produced a clean hole removing the old cap, this step isn't required.
[* black] With a desoldering braid and flux, put he desoldering braid down on the solder joint and let it absorb the old solder from the hole to add new solder in place of the old solder. Use the flux on the board from removal to your advantage here.
[* black] With a desoldering braid and flux, put he desoldering braid down on the solder joint and let it absorb the old solder from the hole to add new solder in place of the old solder. Use the flux on the board from removal to your advantage here.