Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Modifications apportées à l'étape #17

Modifié par Nick

Modification approuvée par Nick

Avant
Après
Inchangé

Lignes de l'étape

[* black] Solder the new cap in the board, and cut the leads to prevent any shortsshorts, and repeat this with all of the capacitors on the board.
[* black] Solder the new cap in the board, and cut the leads to prevent any shortsshorts, and repeat this with all of the capacitors on the board.
[* icon_reminder] Sometimes flux burns when heated up. The power supply will be fine if this happens.
[* icon_note] You can replace the filter capacitor on the AC in side if you so desire, but this capacitor gets the least stress so do not replace it unless you have to, or choose to do so. I chose not to on this one because it was fine.