Réparez vos affaires Communauté Boutique

Modifications apportées à l'étape #5

Modifié par Alyssa Tai —

Modification approuvée par Alyssa Tai

Avant
Après
Inchangé

Lignes de l'étape

[* black] Place cover for the lamp housing back on and screw in place.
- [* icon_note] Make sure that the new lamp is screwed in tightly before putting back the lamp housing cover. Using the Phillips #00 Screwdriver, rotate the screw clockwise but make sure to not tighten it to the point of resistance.
+ [* icon_note] Make sure that the new lamp is screwed in tightly before putting back the lamp housing cover. Using the Phillips #00 Screwdriver, rotate the screw clockwise but avoid tightening it to the point of resistance.