Aller au contenu principal

Modifications apportées à l'étape #3

Modifié par Thomas J

Validation en attente

Avant
Après
Inchangé

Lignes de l'étape

+[* black] If can't find anything suitable in the internet, I'll give you a few tips how to build a screwdriver on your own.
+[* black] Use a steel rod of about 8 mm diameter. Don't use any weaker metals
+[* black] Now try to mill three teeth with equivalent distanze around the boundary of one end of the rod with an angle grinder. After you made this drill a hole perpendicularly in the center of the rod.
+[* black] With some talent you should now have a reasonable screwdriver for the four most terrible screws I've ever seen.

Image 1

Aucune image précédente

Ajouté