Aller au contenu principal

Modifications apportées à l'étape #3

Modifié par Zach Ross

Modification rejetée par Arthur Shi

Avant
Après
Inchangé

Lignes de l'étape

-[* black] I couldn't find anything suitable in the internet, so I built one on my own in this way:
+[* black] Use a 4.5mm Security screwdriver or if you can't find anything suitable in the internet, you can build this way:
[* black] Using a steel rod of about 8 mm diameter.
[* black] I tried to mill three teeth with equivalent distance around the boundary of one end of the rod with an angle grinder. After that I drilled a hole perpendicularly in the center of the rod. Taddaah... a working screwdriver!
[* black] Now let's begin the Teardown.