Modifications apportées à l'étape #7
Lignes de l'étape
| [title] Dismantling the Heating Cone release switch | |
| - | [* black] The release switch was slider mechanism whose top component could just be easily snapped off. Bottom part of the switch was screwed ( M2 x 1mm Phillips Head Screw) into the base. |
| + | [* black] The release switch was a slider mechanism whose top component could just be easily snapped off. Bottom part of the switch was screwed ( M2 x 1mm Phillips Head Screw) into the base. |
| [* yellow] Top switch length: 35mm | |
| [* green] Top switch width: 23mm | |
| [* light_blue] Bottom switch length: 49mm | |
| [* violet] Bottom switch width: 23mm | |
| [* orange] Bottom switch height: 15mm | |
| [* blue] Screw head diameter: 10mm | |
| [* red] Screw shaft length: 8mm |