Modifications apportées à l'étape #8
Lignes de l'étape
| [title] Separating the Base (1) | |
| - | [* red] I first tried unscrewing the base with the 4 screws from the bottom. Although one of the screws was quite stuck and would not unscrew so I moved on to saw through the snap fit |
| + | [* red] I first tried unscrewing the base with the 4 screws from the bottom. Although one of the screws was quite stuck and would not unscrew so I moved on to saw through the snap fit/silicon seal with a multi tool. |
| [* green] Screw head diameter: 7mm | |
| [* blue] Screw shaft length: 12mm |