Modifications apportées à l'étape #10
Lignes de l'étape
| [title] Separating the Base (2) | |
| - | [* black] After removing the dial and halfway sawing through the two parts, I realised that under the Hippo Deluxe brand sticker, there were 2 screws (M2 x 1mm Phillips Head Screw) that needed to be unscrewed to separate the two parts. |
| + | [* black] After removing the dial and halfway sawing through the two parts, I realised that under the 'Hippo Deluxe' brand sticker, there were 2 screws (M2 x 1mm Phillips Head Screw) that needed to be unscrewed to separate the two parts. |
| [* green] Base length: 270mm | |
| [* red] Base width: 225mm | |
| [* yellow] Bottom Base height: 100mm | |
| [* blue] Top Base height: 90mm |