| - | [* violet] Finally remove screws holding down the power cord. Cut of all wires. |
|---|
| - | [* light_blue] Device that connects the dial and heating device. |
|---|
| - | [* orange] The red and green bulbs and the plastic caps that go next to indicating 'empty' and 'on' |
|---|
| + | [* violet] Finally remove screws holding down the power cord. Cut off all wires. |
|---|
| + | [* light_blue] This is the Rotary Switch that connects the dial and heating device. It has a bare shift actuator and I couldn't get it open but most likely houses the PCB board. |
|---|
| + | [* orange] The red and green Led diffuser caps go top of the small Led bulb and next to the signs indicating 'empty' and 'on' |
|---|