Modifications apportées à l'étape #1
Modifié par Andrew Bookholt —
- Avant
- Après
- Inchangé
Lignes de l'étape
[* icon_caution] The next few steps bring your hands close to the exposed face of the power supply. To avoid a high voltage shock from the many large capacitors attached to the board, '''do not''' touch the face of the power supply. |
[* black] Remove the following four screws securing the power supply to the outer case: |
[* red] Two 22.2 mm fine-thread T10 Torx |
[* orange] One 25 mm coarse-thread T10 Torx |
[* yellow] One 9 mm coarse-thread T10 Torx |