Aller au contenu principal

Modifications apportées à l'étape #2

Modifié par Andrew Bookholt

Validation en attente

Avant
Après
Inchangé

Lignes de l'étape

+[* black] Lift the camera board out of the outer case, minding the cable attaching it to the logic board.
+[* black] Disconnect the camera board by pulling its connector away from the socket on the camera board.
+[* icon_reminder] Before reinstallation, be sure that the thermal putty applied to the camera's heat sink is thick enough to make contact with the outer case.

Image 1

Aucune image précédente

Ajouté