Modifications apportées à l'étape #4
Modifié par Nick Schultz —
Modification approuvée par Nick Schultz
- Avant
- Après
- Inchangé
Lignes de l'étape
| [title] Heat the bottom edge | |
| - | [* black] Use an [guide|25705|iOpener|new_window=true], [guide|157348|hair dryer|new_window=true], or [guide|151116|heat gun|new_window=true] to heat the bottom edge of the back glass until it's hot to the touch. |
| - | [* icon_caution] Be careful not to heat the phone hotter than this—the battery is susceptible to heat damage. |
| + | [* black] Heat your [guide|25705|iOpener|new_window=true] and apply it to the bottom edge of the back glass for two minutes. |
| + | [* black] If you're using a [guide|157348|hair dryer|new_window=true] or [guide|151116|heat gun|new_window=true], heat the bottom edge of the back glass until it's hot to the touch. |
| + | [* icon_caution] Be careful not to heat the phone hotter than this—the battery is susceptible to heat damage. |
| [* black] Wait up to a minute for the adhesive to separate and a gap to form between the back glass and the frame. | |
| - | [* icon_note] If a gap doesn't appear after one minute, apply more heat and rotate the handle a quarter turn. Let the Anti-Clamp and time do the work for you. |
| + | [* icon_note] If a gap doesn't appear after one minute, apply more heat and rotate the handle a quarter turn. Let the Anti-Clamp and time do the work for you, repeating this process as necessary. |