Réparez vos affaires Communauté Boutique

Modifications apportées à l'étape #1

Modifié par Nick Schultz —

Modification approuvée par Nick Schultz

Avant
Après
Inchangé

Lignes de l'étape

[title] Remove the upper connector cover
-[* black] Use your Phillips #00 driver to remove the three screws securing the upper connector cover:
- [* red] Two 1.4 mm-long screws
- [* orange] One 3.5 mm-long screw
-[* yellow] Use your tri-point Y000 driver to remove the 1.0 mm-long screw securing the central connector cover.
+[* black] Remove the four screws securing the upper connector cover:
+ [* red] Two 1.4 mm-long Phillips screws
+ [* orange] One 3.5 mm-long Phillips screw
+ [* yellow] One 1.0 mm-long tri-point Y000 screw