Modifications apportées à l'étape #3
Modifié par Sam Gustafson —
Modification approuvée par Sam Gustafson
- Avant
- Après
- Inchangé
Lignes de l'étape
| [title] Remove front lens board | |
| - | [* red] Remove four |
| - | [* orange] Remove one |
| + | [* red] Remove four 4.6 mm flat head screws. |
| + | [* orange] Remove one 4.3 mm flat head screws. |
| [* yellow] Lift off front lens board. | |
| [* green] Note the position and number of shim washers at each screw location. They need to be installed in the same positions during reassembly. |