Aller au contenu principal

Modifications apportées à l'étape #5

Modifié par Spencer Day

Modification approuvée par Spencer Day

Avant
Après
Inchangé

Lignes de l'étape

[title] Remove the board shield
[* black] Use a T8 Torx driver to remove the nine screws securing the board shield:
[* red] Seven 8.7 mm‑long screws
[* orange] Two 35 mm‑long screws
- [* icon_note] These screws are very tight and will take some force to loosen.
+ [* icon_note] These screws are very tight and may take significant force to loosen.
[* yellow] One 13 mm‑long screw