| - | [* red] Unscrew the 1cm screws circled in red with the Phillips head screwdriver. |
|---|
| - | [* orange] Unscrew the 1.2 cm screws circled in orange with the TR10 screwdriver. |
|---|
| - | [* icon_note] The ring will not be hard to remove, but be careful on reassembly. Make sure that the power connector is properly seated when putting the ring back on. |
|---|
| + | [* red] Remove the five 1 cm a Phillips screwdriver. |
|---|
| + | [* orange] Unscrew the four 1.2 cm screws with a TR10 Torx screwdriver. |
|---|
| + | [* icon_reminder] The ring will not be hard to remove, but be careful on reassembly. Make sure that the power connector is properly seated when putting the ring back on. |
|---|