Modifications apportées à l'étape #6
Modifié par Joshua Moreno —
Modification approuvée par Joshua Moreno
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* black] Unscrew the two |
|---|---|
| - | [* black] Unscrew the two larger |
| - | [* black] Unscrew the two |
| + | [* black] Unscrew the two 10 mm Phillips #1 screws at the head of the fan with the Phillips Screwdriver. |
| + | [* black] Unscrew the two larger 14 mm Phillips #1 screws with the Phillips Screwdriver that are located below the first two screws that you just removed. |
| + | [* black] Unscrew the two 10 mm Phillips #1 screws, that are located in between the 14 mm screws, with the Phillips Screwdriver. |
| [* black] ''Note'' Make sure you place the same-sized screws in the right place when you reassemble the fan. |