Modifications apportées à l'étape #2
Lignes de l'étape
| - | [* red] Unscrew all 8 of the 10 mm screws from the speaker panel using a |
|---|---|
| + | [* red] Unscrew all 8 of the 10 mm screws from the speaker panel using a Phillips #2 screwdriver |
| [* black] Using the metal spudger, gently pry at the outer-edges of the speaker to remove the rubber/plastic panel that sits above the motherboard. | |
| [* black] Detach the cable connector from both the rubber/plastic panel and both speakers by squeezing at the base and gently pulling up as to not damage any part of the cable. |