Modifications apportées à l'étape #9
Modifié par Ben Moores —
Modification approuvée par Ben Moores
- Avant
- Après
- Inchangé
Lignes de l'étape
| + | [title] Disconnect PCB |
|---|---|
| + | [* black] Insert the finest tip flat blade screwdriver between the tab on the ribbon cables and the white connectors, and gently pry the 6 FPCs out. |
| + | [* icon_note] Markings on the contact block FPC are: XL1103_CONTAC_FPCB-PV2-110701, FC1441, 1-18 |
| + | [* icon_note] Where FPC are installed contacts down there are two white lines on the FPC reinforcer showing the correct insertion level. One line inside connector and other other just outside. |
| + | [* icon_caution] Be Gentle with the FPC ribbons. |
Image 1
Aucune image précédente
Ajouté
Image 2
Aucune image précédente
Ajouté