Modifications apportées à l'étape #4
Modifié par Alex Diaz-Kokaisl —
Modification approuvée par Alex Diaz-Kokaisl
- Avant
- Après
- Inchangé
Lignes de l'étape
| + | [title] Remove the motherboard |
|---|---|
| + | [* icon_note] Depending on the condition of the thermal paste and putty, the board may be bonded to the heatsink assembly. If you can't easily remove the board, use a spudger to gently lift the edges of the board to separate it. |
| + | [* black] Use your fingers to lift the motherboard straight up and off the heatsink to remove it. |
| + | [* icon_reminder] During reassembly, carefully place the board onto the heatsink with the APU facing down. Remember, there's exposed thermal paste on the bottom of the board, so use the alignment pegs to orient it correctly. If you have to reposition the board, it may smear the thermal paste. |
Image 1
Aucune image précédente
Ajouté
Image 2
Aucune image précédente
Ajouté
Image 3
Aucune image précédente
Ajouté