Aller au contenu principal

Modifications apportées à l'étape #4

Modifié par Derek Hutton

Modification approuvée par Derek Hutton


Lignes de l'étape

[* black] To replace the hard drive panel, do step 3 in reverse:
[* black] Place the panel back in its original position and press down.
[* icon_note] If the hard drive was removed or replaced during this process, improper installation may prevent the hard drive panel from sitting in the slots properly.
[* orange] With the bit driver and Phillips bit, replace the two retaining screws to secure the cover plate in place.