Aller au contenu principal

Modifications apportées à l'étape #4

Modifié par Keith Yu

Modification approuvée par Keith Yu

Supprimé
Ajouté
Inchangé

Lignes de l'étape

[* red] Using the T9 Torx head, remove the two screws at the bottom of the 1.2 inch gap going down the middle of the device.
[* icon_reminder] The internal structure will thenThese screws can come out; be released fromcareful to not lose them. If you don't fully loosen the case; however, unlike most screws,screw, then they will not come out ofcan stay on the deviceinternal structure.
[* icon_reminder] The internal structure will thenThese screws can come out; be released fromcareful to not lose them. If you don't fully loosen the case; however, unlike most screws,screw, then they will not come out ofcan stay on the deviceinternal structure.

Image 1

Ancienne version

Nouvelle version