Aller au contenu principal

Modifications apportées à l'étape #4

Modifié par Rachel Kangas

Modification approuvée par Rachel Kangas

Supprimé
Ajouté
Inchangé

Lignes de l'étape

[* black] Locatered] Using the T9 Torx head, remove the two screws at the bottom of the 1.2 inch gap going down the middle of the device.
[* red] Use the screwdriver extension and the T9 Torx head to unscrew the two screws.
[* black] Once unscrewed, they will release the
icon_reminder] The internal structure will then be released from the case. Unlikecase; however, unlike most screws, however, they will not come out of the device.
[* black] Locatered] Using the T9 Torx head, remove the two screws at the bottom of the 1.2 inch gap going down the middle of the device.
[* red] Use the screwdriver extension and the T9 Torx head to unscrew the two screws.
[* black] Once unscrewed, they will release the
icon_reminder] The internal structure will then be released from the case. Unlikecase; however, unlike most screws, however, they will not come out of the device.