Aller au contenu principal

Modifications apportées à l'étape #4

Modifié par Rachel Kangas

Modification approuvée par Rachel Kangas

Supprimé
Ajouté
Inchangé

Lignes de l'étape

[* red] Using the T9 Torx head, loosen, but,but '''do not remove''' the two screws at the bottom of the 1.2 inch1.2-inch gap going downin the middle of the deviceinternal structure.
[* icon_reminder] These screws are spring-loaded and can come out;stay in the device, even when loosened; however, it is still possible for them to be fully removed. Be careful to not lose'''only partially loosen''' them. If you don't fully loosen the screw, then they can stay on the internal structure.
[* red] Using the T9 Torx head, loosen, but,but '''do not remove''' the two screws at the bottom of the 1.2 inch1.2-inch gap going downin the middle of the deviceinternal structure.
[* icon_reminder] These screws are spring-loaded and can come out;stay in the device, even when loosened; however, it is still possible for them to be fully removed. Be careful to not lose'''only partially loosen''' them. If you don't fully loosen the screw, then they can stay on the internal structure.