Aller au contenu principal

Modifications apportées à l'étape #2

Modifié par Keith Yu

Modification approuvée par Keith Yu

Supprimé
Ajouté
Inchangé

Lignes de l'étape

[* blackicon_caution] Four internal wires, three thin and one thick, are connected to the logic board: three by small end clips and one by a larger end clip. Handle the clips gently; they break easily.
[* black]
To detach the small clips from the connectors, place the flat end of the plastic spudger underneath the clip and gently lever it '''away from the center of the device'''.
[* black] To detach the larger one, place the flat end of the plastic spudger on the side of the clip and lever it '''upward'''.
[* icon_caution] Handle the clips gently; they break easily.
[* blackicon_caution] Four internal wires, three thin and one thick, are connected to the logic board: three by small end clips and one by a larger end clip. Handle the clips gently; they break easily.
[* black]
To detach the small clips from the connectors, place the flat end of the plastic spudger underneath the clip and gently lever it '''away from the center of the device'''.
[* black] To detach the larger one, place the flat end of the plastic spudger on the side of the clip and lever it '''upward'''.
[* icon_caution] Handle the clips gently; they break easily.