Aller au contenu principal

Modifications apportées à l'étape #3

Modifié par Jared Cooper

Modification approuvée par Jared Cooper

Avant
Après
Inchangé

Lignes de l'étape

-[* black] Pivot the keyboard about the lower edge, and lay it upside down on top of the touchpad area to reveal the signal cable.
-[* black] Lightly pull up on the black tab on top of the keyboard signal cable until it hinges toward you and releases the cable end.
-[* black] Pull the cable backward and out of the receptacle. This should not require any effort.
+[* black] Pivot the keyboard about the lower edge, and lay it upside down on top of the touch-pad area to reveal the ribbon cable.
+[* black] Lightly pull up on the black tab on top of the keyboard ribbon cable until it hinges toward you and releases the ribbon cable end.
+[* black] Pull the ribbon cable backward and out of the receptacle. This should not require any effort.