Aller au contenu principal

Modifications apportées à l'étape #3

Modifié par Jared Cooper

Modification approuvée par Jared Cooper

Avant
Après
Inchangé

Lignes de l'étape

-[* black] Extract the eight screws that secure the top cover in place with a PH1 screwdriver.
-[* black] Using the flat end of the spudger or fingernail, pry the top cover away from the base by running the tool along the top cover.
-[* black] Carefully flip the top cover in front of the netbook to dislocate the touch-pad cable.
+[* black] Flip the netbook over and extract the eight screws that secure the top cover in place with a PH1 screwdriver.
+[* black] Using the flat end of the spudger or pry stick, extrude the top cover away from the base by wedging the tool between the base and top cover and run the tool along the side until the cover pops out.
+[* black] Next, carefully flip the top cover in front of the netbook to dislocate the touch-pad cable from the motherboard.