Modifications apportées à l'étape #12
Modifié par chandler bowers —
Modification rejetée par Sam Goldheart
- Avant
- Après
- Inchangé
Lignes de l'étape
| [* black] Here is the top part of the PSU, minus the heatsink and the fan. | |
| [* icon_caution] The disassembly was quick and easy. Interestingly enough there are PSU's for the Xbox that use security screws. Fancy name for proprietary screws that require special tools. The next two images are from a 150W PSU. It appears to be a Torx screw with a center pin. So make sure you have the right tools for the job. | |
| + | [* black] if you don't wanna buy the special tool then you can use a small flat heat to pry the pin out. when you do this it allows just enough room for your Torx to fit. |