Aller au contenu principal

Modifications apportées à l'étape #3

Modifié par Sean Garrett

Modification approuvée par Sean Garrett

Avant
Après
Inchangé

Lignes de l'étape

[* black] Turn the device upside down.
[* red] Take the top portion and removeRemove the four rubber pads that are located by the top screen using a push pin to expose the screws underneathpin.
[* black] After removing the LED hinge, also remove the round hinge shaft.
[* red] Take the top portion and removeRemove the four rubber pads that are located by the top screen using a push pin to expose the screws underneathpin.
[* black] After removing the LED hinge, also remove the round hinge shaft.