Aller au contenu principal

Modifications apportées à l'étape #3

Modifié par Nosh Ware

Modification approuvée par Arthur Shi

Avant
Après
Inchangé

Lignes de l'étape

[* black] Turn the device upside down.
[* red] Remove
red] Using a push pin, remove the four rubber pads that arebumpers located byat the corners of the top screen using a push pinscreen.
[* black] After removing the LEDLEDs and pulling apart the hinge, remove the round hinge shaft. This should be in the top screen piece.
[* black] Turn the device upside down.
[* red] Remove
red] Using a push pin, remove the four rubber pads that arebumpers located byat the corners of the top screen using a push pinscreen.
[* black] After removing the LEDLEDs and pulling apart the hinge, remove the round hinge shaft. This should be in the top screen piece.