Aller au contenu principal

Modifications apportées à l'étape #3

Modifié par MacKinley

Modification approuvée par MacKinley

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* black] Now you must remove the LED from the circuit board.
[* red] To do this you will need to use a soldering iron to detach to two pins of the LED from the board. They are the two pins in the lowest leftmost corner of the board.
[* icon_caution] Be careful to not touch any of the wires with the soldering iron. It might be helpful to remove those with the iron first to get them out of the way.
[* icon_note] [guide|750|If you haven't soldered before check out this guide.]
[* black] Once detached, pull the board straight up to remove.
[* black] Now you must remove the LED from the circuit board.
[* red] To do this you will need to use a soldering iron to detach to two pins of the LED from the board. They are the two pins in the lowest leftmost corner of the board.
[* icon_caution] Be careful to not touch any of the wires with the soldering iron. It might be helpful to remove those with the iron first to get them out of the way.
[* icon_note] [guide|750|If you haven't soldered before check out this guide.]
[* black] Once detached, pull the board straight up to remove.

Image 1

Ancienne version

Nouvelle version