Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Pièces & Outils

Modifications apportées à l'étape #2

Modifié par Nicolas Siemsen

Modification approuvée par Nicolas Siemsen

Supprimé
Ajouté
Inchangé

Lignes de l'étape

[* black] Before you begin, you'll need to remove your door panels on the doors affected. See the door panel removal technique guide.
[*
black] After removing your door panel you'll find the actuator attached to the bottom paneledge of the door. There will be two vacuum lines entering it, and a rod connecting it to an armature of the lock mechanism.
[* black] Before you begin, you'll need to remove your door panels on the doors affected. See the door panel removal technique guide.
[*
black] After removing your door panel you'll find the actuator attached to the bottom paneledge of the door. There will be two vacuum lines entering it, and a rod connecting it to an armature of the lock mechanism.
[* red] Use a screw driver to remove the c-clip that is holding the rod to the metal cross-piece on the actuator. Be careful to save the c-clip someplace safe.