Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Modifications apportées à l'étape #6

Modifié par Cole O'Neal

Modification approuvée par Adam O'Camb

Avant
Après
Inchangé

Lignes de l'étape

[* black] With all the clips undone the logic board is free from the screen assembly, but before removing it lets break it down some more.
[*
black] The flex cable running up the right side of the battery is connected to a smaller board, which is held to an EMI shield on the logic board with a small amount of adhesive,adhesive; it can be carefully pried up.
[* black] With all the clips undone the logic board is free from the screen assembly, but before removing it lets break it down some more.
[*
black] The flex cable running up the right side of the battery is connected to a smaller board, which is held to an EMI shield on the logic board with a small amount of adhesive,adhesive; it can be carefully pried up.
[* black] The same thing can be done to the other side. Peel up the tape holding the flex cables down remembering where they went.
[* black] PAY ATTENTIONicon_note] Pay attention to the side tab on the left flex cable thiscable. This piece can be peeled up the same way don'tway. Do not be afraid to bend it a little (BEND DO NOT BREAK).
[* black] PAY ATTENTIONicon_note] Pay attention to the side tab on the left flex cable thiscable. This piece can be peeled up the same way don'tway. Do not be afraid to bend it a little (BEND DO NOT BREAK).