Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Modifications apportées à l'étape #6

Modifié par Elizabeth Zapata

Modification approuvée par Adam O'Camb

Avant
Après
Inchangé

Lignes de l'étape

[* black] With all the clips undone the logic board is free from the screen assembly, but before removing it lets break it down some more.
[* black] The flex cable running up the right side of the battery is connected to a smaller boardboard, which is held to an EMI shield on the logic board with a small amount of adhesiveadhesive, it can be carefully pried upup.
[* black] The same thing can be done to the other side. Peel up the tape holding the flex cables down remembering where they wentwent.
[* black] PAY ATTENTION to the side tab on the left flex cable this piece can be peeled up the same way dontdon't be afraid to bend it a little (BEND NOT BREAK)BREAK).
[* black] The flex cable running up the right side of the battery is connected to a smaller boardboard, which is held to an EMI shield on the logic board with a small amount of adhesiveadhesive, it can be carefully pried upup.
[* black] The same thing can be done to the other side. Peel up the tape holding the flex cables down remembering where they wentwent.
[* black] PAY ATTENTION to the side tab on the left flex cable this piece can be peeled up the same way dontdon't be afraid to bend it a little (BEND NOT BREAK)BREAK).