Aller au contenu principal

Modifications apportées à l'étape #4

Modifié par Max

Validation en attente

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* black] Lift the fan shroud and fan straight up and out. Take care to disconnect the indicated connector
[* black] Now slide the entire board back approximately 5mmRemove the heatsink clamps with a flathead screwdriver and lift it offdo the chassissame for the other side.
[* icon_caution] This can very difficult! It took us a great dealLift off the heatsink and remove the 4 screws of force to get the board loose. Take great care toCPU board.
[* black] There are 4 pins: remove the 3 pins near the RAM but
not damage the boardpin nearest You.
[* black] You are now ready to slide gently (and without ANY difficult) the motherboard. Lift up and the game is done
.
[* black] Now slide the entire board back approximately 5mmRemove the heatsink clamps with a flathead screwdriver and lift it offdo the chassissame for the other side.
[* icon_caution] This can very difficult! It took us a great dealLift off the heatsink and remove the 4 screws of force to get the board loose. Take great care toCPU board.
[* black] There are 4 pins: remove the 3 pins near the RAM but
not damage the boardpin nearest You.
[* black] You are now ready to slide gently (and without ANY difficult) the motherboard. Lift up and the game is done
.

Image 2

Aucune image précédente

Ajouté(e)

Image 3

Aucune image précédente

Ajouté(e)