Aller au contenu principal

Modifications apportées à l'étape #1

Modifié par iRobot

Validation en attente

Avant
Après
Inchangé

Lignes de l'étape

[* black] Remove the following five screws:
[* red] One 3 mm Phillips near the screen latch (mind the big magnet on the screen latch).
[* orange] Two 3.5 mm Phillips attaching the EMI fingers to the metal framework.
[* yellow] One 10 mm Phillips near the optical drive.
[* green] One 14 mm long 4 mm standoff in the upper left corner. You can remove this standoff either with a 4 mm nut driver or needlenose pliers.
[* black] Lift the EMI fingers above the battery connector away from the metal framework.

Image 1

Aucune image précédente

Ajouté