Aller au contenu principal

Modifications apportées à l'étape #3

Modifié par Andrew Bookholt

Validation en attente

Avant
Après
Inchangé

Lignes de l'étape

+[* black] Carefully de-solder the black, grey, white, and orange leads (boxed in red) from the side of the circuit board near the AF lamp.
+[* black] Lightly heat the joint of each lead with a soldering iron as you apply slight tension to the wire with a pair of tweezers.
+[* icon_caution] Do not excessively heat the board. Also, be sure not to accidentally melt the plastic case with the side of the soldering iron.
+[* icon_caution] ***Do not*** touch the pink lead below the four wires you are de-soldering, as this leads straight to the capacitor.
+[* icon_note] Repeat the process until all four leads are de-soldered.

Image 1

Aucune image précédente

Ajouté

Image 2

Aucune image précédente

Ajouté

Image 3

Aucune image précédente

Ajouté