Modifications apportées à l'étape #4
Modifié par Andrew Bookholt —
- Avant
- Après
- Inchangé
Lignes de l'étape
| + | [* icon_note] In this step, you will de-solder the four wires pictured. Mark the wires with a sharpie or a paint marker to keep track of their locations, as each pair of leads is nearly identical. |
|---|---|
| + | [* black] De-solder the four wires boxed in red using the same procedure on the preceding step. |
| + | [* icon_caution] Do not apply too much heat to the joints as you de-solder, as the ribbon cable they are soldered to is extremely delicate and melts easily. |
Image 1
Aucune image précédente
Ajouté