Aller au contenu principal

Modifications apportées à l'étape #6

Modifié par Nicolas Siemsen

Modification approuvée par Nicolas Siemsen

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* black] With some fluid removed and the top left off of the brake fluid reservoir, use a large pry tool to gently pry the pistons back in to the body of the caliper.
[* black] Always use the flat surface of the pry, never the tip, and try to push the piston back in as straight and evenly as possible.
[* black] Alternately, you can purchase the proper brake caliper piston compression tool from Mercedes...but this pry bar technique works if you are careful.
[* black] Repeat this on all four pistons. Watch the brake fluid level as your proceed to ensure it does not overflow the reservoir. Remove more if necessary.
[* black] Repeat this on all four pistons. Watch the brake fluid level as your proceed to ensure it does not overflow the reservoir. Remove more if necessary.