Aller au contenu principal

Modifications apportées à l'étape #3

Modifié par Nicolas Siemsen

Modification approuvée par Nicolas Siemsen

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[title] Clean the hub surface
[* black] Use a fine grit sandpaper, and optionally a power sander, to work around the flat surface of the hub to remove rust.
[* black] Then use the sandpaper to remove rust from the raised portion at the center of the hub.
[* black] The area around the lug bolt holes is recessed slightly and does not contact the rotors so it does not to be fully de-rusted.
[* black] Spray the hub down with brake cleaner to remove the dust.