Aller au contenu principal

Modifications apportées à l'étape #4

Modifié par Walter Galan

Validation en attente

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* icon_note] In the following steps, you will use a heat gun to soften the adhesive securing the outer aluminum border around the underside of the front glass panel to the display.
[*
black] Insert wisdom hereWith the heat gun set to low, start by heating the outer aluminum border near the lower right corner of the display panel.
[* icon_note] In the following steps, you will use a heat gun to soften the adhesive securing the outer aluminum border around the underside of the front glass panel to the display.
[*
black] Insert wisdom hereWith the heat gun set to low, start by heating the outer aluminum border near the lower right corner of the display panel.