Aller au contenu principal

Modifications apportées à l'étape #5

Modifié par Andrew Bookholt

Validation en attente

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* black] Insert an iPod opening tool between the corner of the outer aluminum bordermetal LCD frame and the front bezel.
[* icon_caution] Be sure you are prying between the metal LCD frame
and the display assemblyfront bezel, '''not''' between the metal LCD frame and the LCD.
[* icon_note] It may be necessary to reheat this area until the adhesive yields enough to insert the edge of a tool
.
[* black] Use the flat end of a metal spudger to gently pry up the adhesive securing the front bezelmetal LCD frame to the displayfront bezel.
[* black] Insert an iPod opening tool between the corner of the outer aluminum bordermetal LCD frame and the front bezel.
[* icon_caution] Be sure you are prying between the metal LCD frame
and the display assemblyfront bezel, '''not''' between the metal LCD frame and the LCD.
[* icon_note] It may be necessary to reheat this area until the adhesive yields enough to insert the edge of a tool
.
[* black] Use the flat end of a metal spudger to gently pry up the adhesive securing the front bezelmetal LCD frame to the displayfront bezel.