Aller au contenu principal

Modifications apportées à l'étape #6

Modifié par Andrew Bookholt

Validation en attente

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* black] Insert wisdom hereWhile it is still inserted between the metal LCD frame and the front bezel, run the edge of your metal spudger along the top edge of the display to separate the adhesive securing the two pieces together.
[* icon_note] If the adhesive is hard to separate, use a heat gun to lightly heat the area you are working on
.
[* black] Insert wisdom hereWhile it is still inserted between the metal LCD frame and the front bezel, run the edge of your metal spudger along the top edge of the display to separate the adhesive securing the two pieces together.
[* icon_note] If the adhesive is hard to separate, use a heat gun to lightly heat the area you are working on
.