Aller au contenu principal

Modifications apportées à l'étape #6

Modifié par Andrew Bookholt

Validation en attente

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* black] While it is still inserted between the metal LCD frame and the front bezel, run the edge of your metal spudger along the top edge of the display to separate the adhesive securing the two pieces togethertogether, heating the area you are working on with a heat gun as necessary.
[* black] While it is still inserted between the metal LCD frame and the front bezel, run the edge of your metal spudger along the top edge of the display to separate the adhesive securing the two pieces togethertogether, heating the area you are working on with a heat gun as necessary.
[* icon_note] If the adhesive is hard to separate, use a heat gun to lightly heat the area you are working on.