Aller au contenu principal

Modifications apportées à l'étape #9

Modifié par iRobot

Validation en attente

Avant
Après
Inchangé

Lignes de l'étape

+[* black] Place enough pressure on the upper case to allow you to slide a tool just within the seam between upper case and lower case as shown in the picture. A dentist's hook, push pin, or similar tool will work.
+[* icon_note] Do not yank the upper case off as soon as you free the clasp. The case is attached to the logic board via two ribbon cables.
+[* black] Delicately slip the tip of your tool behind the silver metal latch and pull it forward while pulling up on the case. This may take some effort.

Image 1

Aucune image précédente

Ajouté