Aller au contenu principal

Modifications apportées à l'étape #4

Modifié par Nicolas Siemsen

Modification approuvée par Nicolas Siemsen

Avant
Après
Inchangé

Lignes de l'étape

+[* black] Inspect the bolt. On the newer style, as pictured, there are two different sizes of o-rings to seal the bolt. One the earlier style, there is only one o-ring.
+[* red] On this bolt, the o-rings are old, brittle, and flattened. They need to be replaced, there are o-rings in most metric o-ring kits that will fit.
+[* black] On the early style housing there is also a copper crush washer that goes under the head of the bolt, in place of the second o-ring. This should be replaced with every filter change.
+[* green] See the new o-rings installed here.

Image 1

Aucune image précédente

Ajouté

Image 2

Aucune image précédente

Ajouté