Aller au contenu principal

Modifications apportées à l'étape #9

Modifié par Andrew Meyer

Modification approuvée par Andrew Meyer

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* black] Use the spudgera plastic opening tool to pryloosen the top panel out of placeby placing the tool underneath the panel at several points and then lifting upwards with a medium force. You will know it is loose if it makes a loud clicking noise.
[* black] PlacingPlace your fingers aton the topside of the panel, liftpanel closest to the monitor. Lift up on that side of the panel with a large amount of force in order to pry it off gentlyoff.
[* black] Use the spudgera plastic opening tool to pryloosen the top panel out of placeby placing the tool underneath the panel at several points and then lifting upwards with a medium force. You will know it is loose if it makes a loud clicking noise.
[* black] PlacingPlace your fingers aton the topside of the panel, liftpanel closest to the monitor. Lift up on that side of the panel with a large amount of force in order to pry it off gentlyoff.